Description
The MW500 is a high performance product dedicated for induction motor control, with embedded features and a high protection degree of IP66 / NEMA 4X which allow decentralized installation directly on the motor or on the wall. Designed for industrial or professional use, the decentralized WEG VSD adds a great deal of flexibility, allowing the user to install the product near to the motor, thus eliminating the necessity of long cables and panels
- Power range: 0.75 to 3.7 kW
- Three-phase
- Power supply voltage: 200-240 V and 380-480 V
- Scalar Control(V/F) and Vector Control(VVW)
- Overload capacity: 150% current in 60 sec.
- RFI Filter built-in (accessory)
- Switch-Disconnector built-In (optional)
- Analog Potentiometer and LED for status indicator built-In
- Ambient temperature -10 ºC up to 50 ºC
- All the electronic boards are conformally coated classified as 3C2 according to IEC 60721-3-3 standard
- Protection Degree IP66/NEMA 4X
- SoftPLC function built-in
- Plug-in modules: I/Os, USB and fieldbus communication (same as CFW500)
- Flash memory module: In few seconds, it is possible to download the programming from a MW500 to others without powering them up
- Communication protocols: Modbus RTU (RS-485 available with all plug-in modules), CANopen, DeviceNet and Profibus DP
- WLP and SuperDrive G2 free software
Additional links:
| Manufacturer: | WEG |
| Series: | MW500 |
| Model: | MW500 B 06P5 T4 DB 66 |
| Application: | general purpose |
| Capacity, kW: | 2,2 |
| Current, А: | 6.5 |
| Main power supply, V: | 380-480 |
| Phase: | 3 |
| Enclosure: | IP66 |
| Overload capacity, % per 1 min.: | 150 |
| Braking unit: | + |
| PID: | PID-controller |
| Operation temperature, °С: | -10.....+50 |
| Storage temperature, °С: | -10.....+50 |
Customer Reviews 0 Reviews Write a Review
This product hasn't received any reviews yet. Be the first to review this product!
