Description
SINAMICS G120D is suitable for the open-loop and closed-loop control of induction motors in a wide range of industrial applications and horizontal or vertical requirements of positioning. The drive is predestined to be used in complex conveyor systems – such as are found in automobile production with their numerous distributed single-motor drives. Further, the inverter is also suitable for high-performance applications in the airport sector, in the F&B sector (dry zones) and for electric suspended monorails in distribution logistical systems.
- Positioning capability using an incremental and/or absolute position measuring system
- Extended safety function
- Energy recovery, low line harmonics, energy saving, braking resistors are not required
- Safety I/Os on board
- Higher number of I/Os
- Simple and fast diagnostic capability
- IRT and PROFIenergy-capable
- Only few parts have to be stocked as a result of the modularity
- Standard connector systems
- Rugged, low-profile design
Additional links:
| Manufacturer: | Siemens |
| Series: | SINAMICS G120D |
| Model: | 6SL3525-0PE27-5AA1 |
| Application: | lifts / cranes |
| Capacity, kW: | 7,5 |
| Current, А: | 19 |
| Main power supply, V: | 380-500 |
| Phase: | 3 |
| Output frequency, Hz: | 0-550, 0-200 (sensorless vector control) |
| Enclosure: | IP 65 |
| Overload capacity, % per 1 min.: | 200% (3 sec.) |
| Acceleration time, sec: | 0-650 |
| Deceleration time, sec: | 0-650 |
| EMC filter: | + |
| Analog input: | 2 |
| Digital input: | 6 |
| Analog output: | - |
| Digital output: | 2 |
| Relay output: | - |
| RS485 (Modbus RTU): | PROFIBUS DP, PROFINET I/O, PROFIsafe |
| PID: | PID - controller |
| V/f control mode: | + |
| Vector control with feedback: | + |
| Sensorless vector control: | + |
| Operation temperature, °С: | -10......+40 |
| Storage temperature, °С: | -40......+70 |
| Dimensions (W x H x D), mm: | 445x210x220 |
| Weight, kg: | 8,5 |
