Accessories Smoke

LED-03 is a light box for alarm indication of a hidden smoke detector. The light box is adapted to Calectros 24V smoke detectors, e.g. UG-3-O and EVC-PY-DA. Supply voltage from smoke detector: 24V DC. Maximum cable length 3 m. Pro…

ETUK-1 ETUK-1 is a standard enclosure with DIN rail for mounting e.g. our thermostats and control units on the wall. It is intended for products with 2-3 modules and is IP55. Standard enclosure made of self-extinguishing Polystyre…

VR-1.5M For ducts smaller than 0.6 m use venturi pipe length 0.6 m. For ducts between 0.6 and 1.3 m use venturi pipe length 1.5 m. For ducts over 1.4 m use venturi pipe length 2.8 m. VR-0.6M Venturi pipe 0.6 meter for UG-3 VR-1.5M…

VR-2.8M For ducts smaller than 0.6 m use venturi pipe length 0.6 m. For ducts between 0.6 and 1.3 m use venturi pipe length 1.5 m. For ducts over 1.4 m use venturi pipe length 2.8 m. VR-0.6M Venturi pipe 0.6 meter for UG-3 VR-1.5M…

ST-EXTEND ST-EXTEND is an extension tube to standard air sampling tubes for Uniguard duct smoke detectors for ventilation system. The extension tube is compatible with all our venturi tubes from the VR and ST series. A number of e…

STB-4SE-24VRSampling tube 0.6 meter for Uniguard Superflow, UG-5/7...

STB-4SE-12VRSmoke detector base with built-in relay for ST-P-12V.

UG-MB For mounting of Uniguard Superflow on circular or insulated flat ducts. Properties Easily adapted by hand Quick assembly

HFU204 Rubber gasket for long venturi tubes and mounting brackets. The gasket is used with our long venturi tubes when the tube has to go through the entire width of the duct and penetrate the duct wall on the opposite side. The g…

UG-COVER Used as condensation protection for Uniguard Superflow smoke detector when mounted outdoors or in cold attics.

STB-4SE-24VRLSmoke detector base with built-in relay for ST-P-24V. With closed-circuit relay.

STB-4SE-12VRL Smoke detector base with built-in relay for ST-P-12V. With closed-circuit relay.

UB-6 Base for smoke detectors: EVC-PY-DA, ST-P-DA, ST-I-DA, NS-AOS och NS-AIS. Properties Base for smoke detectors

VR-0.6M For ducts smaller than 0.6 m use venturi pipe length 0.6 m. For ducts between 0.6 and 1.3 m use venturi pipe length 1.5 m. For ducts over 1.4 m use venturi pipe length 2.8 m. VR-0.6M Venturi pipe 0.6 meter for UG-3 VR-1.5M…

UG-COVER-75 Insulation cover UG-COVER-75 is used as condensation protection for Uniguard Superflow smoke detector when mounted outdoors or in cold attics. Properties Prevents condensation

UG-MB-75 For mounting of Uniguard Superflow on circular or insulated flat ducts. The mounting bracket is deliverd together with a sealing sleeve and a rubber gasket. Properties Easily adapted by hand Quick assembly

ST9 For ducts smaller than 0.6 m use sampling tube length 0.6 m. For ducts between 0.6 and 1.3 m use sampling tube length 1.5 m. For ducts over 1.4 m use sampling tube length 2.8 m. ST2 Sampling tube 0.6 meter for UG-5 and UG-7 ST…

ST5 For ducts smaller than 0.6 m use sampling tube length 0.6 m. For ducts between 0.6 and 1.3 m use sampling tube length 1.5 m. For ducts over 1.4 m use sampling tube length 2.8 m. ST2 Sampling tube 0.6 meter for UG-5 and UG-7 ST…

ST2 For ducts smaller than 0.6 m use sampling tube length 0.6 m. For ducts between 0.6 and 1.3 m use sampling tube length 1.5 m. For ducts over 1.4 m use sampling tube length 2.8 m. ST2 Sampling tube 0.6 meter for UG-5 and UG-7 ST…