| Product Attribute | Attribute Value | Search |
|---|---|---|
| Approvals | CSA C22.2 No. 14-M95, Canadian Safety Standards, EN 61010-1, File E137808, IEC 529, IEC 61010-1, IP65 Enclosure Rating, LISTED by Und. Lab. Inc. to U.S., Type 4X, UL Listed, UL50, UL508 | |
| Connection Type | Terminal | |
| Dimensions | 26' L x 2.25' W x 7.875' H | |
| Display Digit Height | 57 mm | |
| Display Size | 4 in. | |
| Display Type | LED | |
| Function | Counter | |
| Input Type | Voltage | |
| Material, Casing | Aluminum | |
| Measurement Range | 0 to 99999 | |
| Measuring Range | 0 to 99999 hrs. hrs. | |
| Minimum Operating Temperature | 0 °C °C | |
| Mounting Type | Panel Mount | |
| Number of Digits | 6 Digits | |
| Number of Ports | 2 Port | |
| Primary Type | Electronic | |
| Product Header | 4' High 6-Digit Red LED Counter | |
| Series | LD Series | |
| Special Features | RS485/RS232 Communications | |
| Supply Voltage | 250 V VAC | |
| Temperature Range | 0 to +65 °C °C | |
| Temperature, Opening, Maximum | 65 °C °C | |
| Termination | Terminal Block | |
| Type | Electromechanical |
\n\n
Overview
Red Lion LD Series – LD400600 Large Display LED Counter:
The Large Serial Slave Display is a versatile display that accepts serial ASCII data from a host device and displays the received characters. The displayable data includes numeric, 7-segment alphabetic and certain punctuation characters. The 6-digit displays are available in either 2.25' or 4' high red LED digits with adjustable display intensity. The 2.25' high models are readable up to 130 feet. The 4' high models are readable up to 180 feet. Both versions are constructed of a NEMA 4X/IP65 enclosure in light weight aluminum.
The Serial Slave has two internal display buffers, allowing two separate display values or messages to be viewed. The main (primary) display typically shows dynamic data (count, rate, process, etc.), usually received directly from another meter. The secondary display typically shows a fixed message or value, such as a system or machine identifier, or a target production value. The main and secondary displays can be toggled either manually or automatically at a user selected toggle speed. Both displays are retained in memory when power is removed from the unit. For single meter remote display applications, the Serial Slave can be connected directly to a Red Lion (or compatible) meter with RS232 or RS485 serial communications. The slave can display the meter value on its main display without requiring a PC or other serial interface. Multiple slaves are connected using an RS485 serial bus. If unique meter addresses are assigned, specific data can be displayed by a single slave on the bus.
When multiple slaves are assigned the same address, common data can be displayed by multiple units in different locations. The serial interface is plug jumper selectable for RS232 or RS485 connections. Serial communications parameters are fully programmable, with baud rates up to 38.4Kbps. Special command characters allow display selection and display intensity adjustment through the serial input. In addition to the serial input, a programmable User Input is provided to perform a variety of meter functions.
Features:
